|
|
now carries the fine products of including their lines of tower sidearms (mounts which hold small to medium weight antennas from 24 to 36 inches from the tower leg so that distortion of the antenna pattern by close proximity to the tower is minimized) as well as the "Sidewinder", a rotating side mount which allows antennas (including HF beams) to be mounted on the side of the tower and still be rotated as much as 315 degrees. products use quality aluminum, T.I.G. welded for clean, solid joints, as well as stainless hardware for long, trouble-free life. Custom work is welcomed, TIG welding aluminum, steel, and stainless steel. Visit our page or our Antenna Magic Interested in very lightweight, low-profile wire beams, loops, and quads for HF? Fiberglass-reinforced thermosetting resin pipe (RTRP) is available in diameters from 1 in. to 84 in., using epoxy and vinyl ester resin systems. Centrifugally cast pipe is available in sizes from 1 in. through 14 in., and it is used, along with F-Chem filament wound pipe, where extreme corrosion resistance, strength, and durability are required. The installation cost is less expensive than steel pipes. Literature describes advanced performance, epoxy, vinyl ester, high pressure, and specialty piping systems. A chart lists the size range, pressure rating, maximum temperature, types of joints, and typical applications for each type of pipe. The brochure describes 10 different joining systems, tools and accessories, and various fittings. Tencom is a manufacturer of fiberglass-reinforced composite rods. Through the use of the manufacturing process known as "Pultrusion", we are able to produce composite rod products in a variety of custom lengths and colors. Ourcompany is dedicated to providing its customers consistently high quality product at the very best prices and with no compromises in customer service. Our company can service almost any need in pultruded composite rod. If you use or are considering using composite rod, contact us for a competitive quote. Our company also offers several secondary operations, including the rods punching and drilling of fiberglass. Continuous fiber reinforcement in roving or mat/ roving forms are drawn through a resin bath to coat each fiber with a specially formulated resin mixture. The coated fibers are then drawn through a heated die.
|